Dual Wall Adhesive Lined Polyolefin Heatshrink Tubing
Dual wall adhesive lined polyolefin heatshrink tubing is ideal for producing strong, weather tight seals on any heatshrink installation. During the application of heat from a heat gun or other hot air tool, the inner adhesive wall melts and flows, creating an adhesion layer to ensure a snug fit to your harness or connector. Shrinkflex adhesive lined heatshrink tubing has a 2:1 shrink ratio and is available in 4 colors in 4' precut sticks.
Certifications:
Product Sizes
| Size | Part Number | Unshrunk Diameter | Shrunk Diameter | Bulk Box Put Up/4' Pcs. | Shop Box Put Up/4' Pcs. | Lbs Per Ten Pieces |
|---|---|---|---|---|---|---|
| 1/8" | H2A0.13 | 3.2mm | 1.6mm | 250 | 25 | 0.170 |
| 1/4" | H2A0.25 | 6.4mm | 3.2mm | 250 | 25 | 0.320 |
| 3/8" | H2A0.38 | 9.6mm | 4.8mm | 250 | 25 | 0.530 |
| 1/2" | H2A0.50 | 12.7mm | 6.4mm | 200 | 25 | 0.650 |
| 3/4" | H2A0.75 | 19.1mm | 9.6mm | 80 | 25 | 1.590 |
| 1" | H2A1.00 | 25.4mm | 12.7mm | 50 | 25 | 1.630 |
| 1 1/2" | H2A1.50 | 38.1mm | 19.1mm | 15 | 5 | 2.500 |
WARNING:
This product can expose you to chemicals including:
Antimony oxide (Antimony trioxide)
known to the State of California to cause:
Cancer.
For more information go to:
www.P65Warnings.ca.gov